Roland VGA-3 Manual de usuario descargar pdf (Pagina 12)

Settings for the GK Pickup (GK Setup)

The Type of Settings

GK SETTING Settings

You can store three sets of settings in the VGA-3.

This conveniently allows you to prepare separate settings for

a multiple number of guitars equipped with a GK pickup.

fig.0022

1. Rotate [GUITAR TYPE] to select “ST” (GK SETTING).

2. Press a MEMORY button [1]–[3] to select the GK SETTING

set you want to enable (the settings you want to change).

* There is no need to change the settings if you are making them

for the first time or if you are not using multiple GK settings.

In this case, select [1] Set A, the factory default setting.

GK DIRECTION Setting

This sets the direction of the GK pickup's installation.

1. Rotate [GUITAR TYPE] to select

“LP” (GK DIRECTION).

2. Press the MEMORY button [1] or [2] to select the

direction in which the pickup is attached.

fig.0030

* If it is difficult to determine the direction in which the GK

pickup was installed on a GK compatible guitar, try it out

initially at the [1] NORMAL setting.

If there is no response from the meter when you play string 6

during the GK SENS 6 settings (p. 13), but there is a response

when you play string 1, change the setting to [2] REVERSE.

Memory button Setting

[1] Set A

[2] Set B

[3] Set C

GK DIRECTION

GK PHASE

GK S1/S2

GK SENS 1–6

GK LEVEL

Set C

GK DIRECTION

GK PHASE

GK S1/S2

GK SENS 1–6

GK LEVEL

Set B

GK DIRECTION

GK PHASE

GK S1/S2

GK SENS 1–6

GK LEVEL

Set A

Memory button Setting

[1] NORMAL

In this direction, the cable exits on

the side of string 6.

[2] REVERSE

In this direction, the cable exits on

the side of string 1.

NORMAL

REVERSE

string 6 string 1 string 6 string 1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comentarios a estos manuales

Sin comentarios

Roland VGA-3 Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales Roland VGA-3