Roland VS-1680 Manual de usuario descargar pdf (Pagina 7)

The playback pitch is strange

●The Vari-Pitch function is turned on (the VARI

PITCH indicator is lit).

●The time compression/expansion function is being

used (Owner’s Manual p. 90).

Disk drive problems

The internal hard disk is not being

recognized

●The hard disk has not been installed correctly.

●“IDE Drive” is set to “Off” (Owner’s Manual p. 189).

●The “Partition” settings are not right.

→When a high-capacity hard disk is installed in the

VS-1680, we recommend setting the partition size to

“2000MB.”

The Zip drive is not recognized

●The Zip drive is not connected correctly.

●The same device ID number is assigned to two or

more SCSI devices (Zip drives , CD-R drives, etc.).

●The Zip drive has not been initialized (Owner’s

Manual p. 111).

●No Zip disk is inserted in the drive.

→When switching Zip disks, be sure to select the

newly inserted disk as the current drive.

●An archives copy Zip disk is inserted.

Internal Effects

Effects cannot be used

●The VS8F-2 has not been installed correctly.

●Only one VS8F-2 has been installed (when EFFECT B

cannot be used).

●You are attempting to select the algorithm for

Reverb, Gated Reverb, Vocoder 2, or Voice

Transformer with EFX2 or EFX4.

●You are attempting to select the algorithm for

Vocoder 2 or Voice Transformer with EFX1 or EFX3

(p. 105, 106).

CD-R Drive Problems

The CD-R drive is not being recognized

●The CD-R drive is not connected correctly.

●The same device ID number is assigned to two or

more SCSI devices (Zip drives , CD-R drives, etc.).

●No CD-R disc is inserted in the drive.

●A CD-R drive that is not designated by Roland.

Cannot write to CD-R discs

●The song’s sample rate is set to something other than

44.1 kHz (Owner’s Manual p. 58).

●No IDE hard disk is installed.

●The internal IDE hard disk does not have sufficient

free disk space (Owner’s Manual p. 169).

●The CD-R disc does not have sufficient free space.

●You are trying to write to a commercial CD software

disc.

●You are trying to write to a CD-R disc that has been

finalized.

MIDI Devices

With the VS-1680 as master, the

sequencer does not respond to com-

mands

●The MIDI cable is not connected correctly.

●The MIDI cable is broken.

●The MIDI Thru switch is not set to “Out” (Owner’s

Manual p. 129).

●“Sync Gen.” (the sync generator) is not set to the

appropriate synchronization method (MTC, MIDI

Clock, Sync Track) (Owner’s Manual p. 133).

●The EXT indicator is blinking (“Sync Source” is set

to “EXT”).

●The two devices are not set to the same type of MTC

(during MTC synchronization).

●The MIDI clock data has not been recorded on the

sync track (if you are using the sync track for syn-

chronization).

●The settings of the MIDI sequencer are not correct.

●The MIDI sequencer is not ready to playback.

Troubleshooting

1 2 3 4 5 6 7 8 9 10 11 12 ... 135 136

Comentarios a estos manuales

Sin comentarios

Roland VS-1680 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales Roland VS-1680