Roland SJ-540 Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 26
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
13
Chapter 1: Installation
Control Panel
Display [POWER] Switch
This switches the controller
on and off.
[C1] Indicator
This indicator lights
when the heater is op-
erating. It goes dark
when heater tempera-
ture reaches the preset
temperature and the
heater stops operating.
The heater operates only
both the sub power for the
printer and the [POWER]
switch are switched on.
Indicators other than [C1]
do not light.
This indicator lights when
the controller is switched
on.
PV
(Heater temperature)
This shows the current
temperature of the heater.
It displays error messages
in the event of a problem
in the heater unit.
SV
(Preset temperature)
This shows the preset
temperature of the heater.
The number flashes when
only the controller is on.
It remains steadily lit
when both the controller
and the sub power for the
printer are on.
[
] Key
Pressing this key one time increases the preset
temperature by 1 ºC.
[
] Key
Pressing this key one time lowers the preset tem-
perature by 1 ºC.
[SEL] Key [ ] Key [ ] Key
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Comentarios a estos manuales

Sin comentarios