Roland LEC-540 Manual de usuario descargar pdf (Pagina 2)

Roland reserves the right to make changes in specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland dealer for details. No

guarantee or warranty is implied other than expressly stated. Roland shall not be liable for any incidental or consequential damages, whether foreseeable or not, caused by defects in such products. Customers are responsible for observing related laws and ordinances if

printed materials will be in direct contact with food or beverage.

Adobe, PostScript, PostScript 3 and the PostScript logo are trademarks of Adobe Systems Incorporated. PANTONE

is the property of Pantone LLC. All other trademarks are the property of their respective owners. Reproduction or use of copyrighted material is governed by

local, national, and international laws. Customers are responsible for observing all applicable laws and are liable for any infringement. Roland DG Corp. has licensed the MMP technology from the TPL Group.

www.rolanddg.com

AUTHORIZED DEALER:

Printed in Japan. RDG-416083499 14 JUN AB-2 P-S

Specifications

Printing technology

Ink cartridges

Ink-curing unit

Media

Printing / cutting width

Printing resolution (dots per inch)

Cutting speed

Blade force

Blade offset compensation

Software resolution (when cutting)

Distance accuracy (when printing)

*4 *5 *9

Distance accuracy (when cutting)

*4 *9

Repetition accuracy (when cutting)

*4 *6 *9

Alignment accuracy for printing and cutting

*4 *7 *9

Alignment accuracy for printing and cutting when reloading media

*4 *8

Connectivity

Power-saving function

Power requirements

Power consumption

Acoustic noise level

Dimensions (with front table and stand)

Weight (with stand)

Environmental

Accessories

Types

Capacity

Colors

Configuration

Width

Thickness

Roll outer diameter

Roll weight

Core diameter

During operation

Sleep mode

During operation

During standby

Power on

Power off

Roland VersaWorks System Requirements

Operating system

CPU

RAM

Video card and monitor

Free hard-disk space

Hard-disk file system

Optical drive

Magenta, 220cc

Yellow, 220cc

Cyan, 220cc

Black, 220cc

White, 220cc

Gloss, 220cc

Magenta, 220cc

Yellow, 220cc

Cyan, 220cc

Black, 220cc

White, 220cc

1 pc.

For vinyl, sandblast, card board, 1pc.

For thick, reflective and fluorescent vinyl,2pcs.

For thick, reflective and fluorescent vinyl, 5pcs.

Blade holder with blade extension adjuster, made of aluminum

ECO-UV Ink

ECO-UV S Ink

Cleaning liquid

Crease tool

Blades

Blade holder

Options Model Description

*1 Ink configuration must be selected upon purchase.

*2 The media holder for this machine is exclusively designed for media rolls with a paper tube measuring 3 inches in diameter. To use 2-inch media rolls, the optional media flanges are required.

*3 The length of printing or cutting is subject to the limitations of the program.

*4 Using Roland specified media, loaded correctly, temperature: 25℃ (77℉), humidity: 50 %, all pinch rollers are used, 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media. and all correction and

adjustment functions of this machine have been made properly.

*5 Using Roland specified media, print travel of 1m

*6 [PREFEED] menu item must be set to "ENABLE," Media 3,000 mm long.

*7 Provided that media length is under 3,000 mm. Excluding possible shift caused by expansion or contraction of the media and/or by reloading the media.

*8 Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to "ENABLE."

Excludes the effects of skewed movement and of expansion and contraction of the media.

*9 Applicable when neither the front table nor the rear table is used.

Vaporized components may slightly irritate the eyes, nose and/or throat during and following printing with this product. If continuously

printing in a closed space, the density of volatile compositions will accumulate and may irritate the eyes, nose and /or throat. Roland

strongly recommends that you install a ventilation system and use this product in a well-ventilated room. For more information, please

contact your local distributor or dealer.

About White Ink

Due to the nature of white ink, the pigment will settle in the cartridge and ink flow system, requiring you to shake the

cartridge before each use.

Piezo electric inkjet

Roland ECO-UV INK/Roland ECO-UV S INK

220 cc

ECO-UV INK: Six colors (cyan, magenta, yellow, black, white and gloss)/ECO-UV S INK: Five colors (cyan, magenta, yellow, black, white)

ECO-UV INK (CMYK+Gloss+White, CMYK+White+White, or CMYK+Gloss+Gloss)/ECO-UV S INK (CMYK+White+White)

Dual UV-LED Lamp

260 to 1371 mm (10.2 to 54 in.)

Maximum 1.0 mm (39 mil) with liner, for printing, Maximum 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting

Maximum 210 mm (8.3 in.)

Maximum 30 kg (66 lb.)

76.2 mm (3 in.) or 50.8 mm (2 in.)

Maximum 1346 mm (53 in.)

Maximum 1440 dpi

10 to 600 mm/s (10 to 300 mm/s in media-feed direction)

30 to 300 gf

0.000 to 1.500 mm (0 to 0.0591 in.)

0.025 mm/step (0.000984 in./step)

Error of less than ±0.3% of distance traveled, or ±0.3 mm, whichever is greater

Error of less than ±0.4% of distance traveled, or ±0.3 mm, whichever is greater

When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION] has been made):

Error of less than ±0.2% of distance traveled, or ±0.1 mm, whichever is greater

±0.1 mm or less

±0.5 mm or less

Error of less than ±0.5% of distance traveled, or ±3 mm, whichever is greater

Ethernet (10BASE-T/100BASE-TX, automatic switching)

Automatic sleep feature

AC 100 to 240 V ±10%, 50/60 Hz, maximum 5.5 A

490 W

15.3 W

64 dB (A) or less

40 dB (A) or less

2,925 (W)

1,120 (D)

1,260 (H) mm (115.2 (W)

44.1 (D)

49.6 (H) in.)

225 kg (496 lb.)

Temperature: 20 to 32℃ (68 to 90℉) [22℃ (72℉) or higher recommended], humidity: 35 to 80% (no condensation)

Temperature: 5 to 40℃ (41 to 104℉), humidity: 20 to 80% (no condensation)

Stand, power cord, crease tool (XD-CT), blade (ZEC-U5022, ZEC-U3050), blade holder (XC-CH2), media clamps, replacement blade for separating knife, cleaning kit,

software RIP (Roland VersaWorks ), and user's manual, etc.

EUV-MG

EUV-YE

EUV-CY

EUV-BK

EUV-WH

EUV-GL

EUVS-MG

EUVS-YE

EUVS-CY

EUVS-BK

EUVS-WH

SL-CL

XD-CT

ZEC-U3050

ZEC-U5022

ZEC-U5025

XD-CH2

Windows

8/8.1 (32/64-bit); Windows

7 Professional/Ultimate (32/64-bit);

Windows Vista

Business/Ultimate (32/64-bit edition)

Intel

Core™2 Duo, 2.0 GHz or faster recommended

2 GB or more recommended

A resolution of 1,280 x 1,024 or more recommended

40 GB or more recommended

NTFS format

DVD-ROM drive

*Roland VersaWorks is a 32-bit application, which runs on 64-bit Windows

with WoW64 (Windows 32-bit on Windows 64-bit).

*Windows

RT is excluded.

1 2

1,371 mm (54") 1
AUTHORIZED DEALER: 2

Comentarios a estos manuales

Sin comentarios

Roland LEC-540 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Roland LEC-540