Roland VS-640i Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
Print Speeds
Windows®8 (32-bit,
64-bit)
Windows® 7 (32-bit,
64-bit)
Windows Vista® (32-
bit, 64-bit)
Windows® XP (32-
bit, 64-bit)
CPU
Core™2 Duo, 2.0 GHz
or faster
recommended
RAM
2 GB or more
Video card and monitor
A resolution of 1280
x 1024 resolution or
more recommended
Free hard-di sk space
40 GB or more
recommended
Hard-disk file system NTFS format
Optical drive DVD-ROM drive
Roland VersaWorks System Requirements
*1 The media holder of this machine is exclusively for media with a paper tube core inner diameter of 3 inches. To use a 2 inch medi a core, please use the optionally avai lable media fl anges.
*2 The length of printing or cutting is subject to the li mitations of the program.
*3 Using Roland specified media, loaded correctly, temperature: 25 ºC (77ºF), humidity: 50 %RH, all pinch roll ers are used, 25 mm or more for both right and left margins and 35 mm or more front
margin, excluding expansion or contraction of the media. and al l correction and adjustment functions of this machine have been made properly. Not assured when the print heater or dryer is used,
*4 Using Roland specified media, print travel of 1m
*5 [PREFEED] menu item must be set to "ENABLE," 64-inch and 54-inch models, media over 610 mm wide, and 4,000 mm long. Media 610 mm wide or less and 8,000 mm long.inch and 30-i nch models,
*6 Provided that media length is under 3,000 mm. Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*7 Using Roland specified media, 64-inch and 54-inch models: data size: 1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement di rection. 42-inch model: data size: 1,000 mm in
the medi a-feed direction, 1,346 mm in the carriage-movement direction. 30-inch model: data size: 1,000 mm in the media-feed direction, 736 mm in the carriage-movement direction.
No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to "ENABLE." Excludes the effects of slanted movement and of
expansi on and contraction of the media.
*8 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached dependi ng on the ambient
Adobe® Illustrator® 10, CS, CS2, CS3, CS4, CS5, CS6
CorelDRAW® 11, 12, X3, X4, X5
Application software compatibl e with Cutting and Pri nt&Cut
Operating system
Print mode Resolution [dpi] Passes
VS-640i VS-540i VS-300i
Billboard 360x720 2 289 ft2/h (26.9 m2/h) 278 ft2/h (25.9 m2/h) N/A
High Speed 360x720 3 194 ft2/h (18 m2/h) 185 ft2/h (17.2 m2/h) N/A
Standard 720x720 5 141 m2/h (13.1 m2/h) 132 ft2/h (12.2 m2/h) N/A
High Quality 1440x720 6 63 ft2/h (5.9 m2/h) 61 ft2/h (5.7 m2/h) N/A
High Speed 540x720 5 141 m2/h (13.1 m2/h) 132 ft2/h (12.2 m2/h)
106 ft2/h (9.82
m2/h)
Standard 720x720 6 117 ft2/h (10.9 m2/h) 110 ft2/h (10.2 m2/h) 88 ft2/h (8.18 m2/h)
High Quality 1440x720 6 47 ft2/h (4.4 m2/h) 46 ft2/h (4.3 m2/h) 39 ft2/h (3.66 m2/h)
Generic Banner
Generic Vinyl
4 Color CMYK
Throughput
Vista de pagina 7
1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios