Roland XR-640 Manual de usuario descargar pdf (Pagina 4)

Specications

Printing / cutting method Piezo ink-jet / media-moving method

Media

Width 315 to 1,625 mm

Thickness

Maximum 1.0 mm with liner, for printing

Maximum 0.4 mm with liner and 0.22 mm without liner, for cutting

Roll outer diameter Maximum 210 mm

Roll weight Maximum 40 kg

Core diameter 76.2 mm or 50.8 mm

Printing / cutting width*1 Maximum 1,600 mm

Ink

Cartridges

440-cc cartridge (cyan, magenta, yellow, black, light cyan, light magenta, light black)

220-cc cartridge (metallic silver, white)

Colours

Seven colours (cyan, magenta, yellow, black, light cyan, light magenta, light black) or,

Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, light black, white) or,

Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, light black, metallic silver) or,

Eight colours (cyan, magenta, yellow, black, light cyan, light magenta, metallic silver, white)

Printing resolution (dots per inch) Maximum 1,440 dpi

Cutting speed / Blade force 10 to 600 mm/s (Media-feed direction: 10 to 300 mm/s) / 30 to 300 gf

Cutting blade Type: Roland CAMM-1 series compatible / Blade oset: 0.000 to 1.500 mm

Software resolution (when cutting) 0.025 mm/step

Distance accuracy (when printing) *2*3 Error of less than ±0.3 % of distance travelled, or ±0.3 mm, whichever is greater

Distance accuracy (when cutting) *2

Error of less than ±0.4 % of distance travelled, or ±0.3 mm, whichever is greater

When distance correction has been performed (when the setting for [CUTTING MENU] - [CALIBRATION]

has been made): Error of less than ±0.2 % of distance travelled, or ±0.1 mm, whichever is greater

Repeatability (when cutting)*2*4 ±0.1 mm or less

Alignment accuracy for printing and

cutting *2*5

±0.5 mm or less

Alignment accuracy for printing and

cutting when reloading media *2*6

Error of less than ±0.5 % of distance travelled, or ±3 mm, whichever is greater

Dryer unit Heating type, setting range for the preset temperature: 30 to 55C°

Ink-xing device *7 Print heater / preheater, setting range for the preset temperature: 30 to 50C°

Connectivity Ethernet (10BASE-T/100BASE-TX, automatic switching)

Power-saving function Automatic sleep feature

Power requirements AC 100 to 120 V ±10 %, 12 A, 50/60 Hz or AC 220 to 240 V ±10 %, 6.5 A, 50/60 Hz

Power During operation: Approx. 1,600 W / Sleep mode: Approx. 47 W

Acoustic noise level During operation: 65 dB (A) or less / During standby: 45 dB (A) or less

Dimensions / Weight (with stand) 2,948 (W) x 1,211 (D) x 1,260 (H) mm / 205 kg

Environmental

Power on Temperature: 15 to 32°C (20°C or more recommended), humidity: 35 to 80%RH (non-condensing)

Power o Temperature: 5 to 40°C, humidity: 20 to 80%RH (non- condensing)

Accessories

Exclusive stands, power cord, blade, blade holder, media clamps, media holder, replacement blade for

separating knife, software RIP, User’s Manual, etc.

*1 The length of printing or cutting is subject to the limitations of the program.

*2 Media type: Media specied by Roland DG Corp. Temperature: 25°C, humidity: 50%. Roll media must be loaded correctly. Applicable when all pinch rollers available to

the media width are used. Side margins: 25 mm or more for both the left and right margins. Front margin: 35 mm or more. Excluding expansion/contraction of the media.

Not assured when the print heater or dryer is used. All correction or adjustment function of this machine has been made properly.

*3 Print travel: 1m

*4 [PREFEED] menu item must be set to “ENABLE.” Range for assured repetition accuracy. For media with a width exceeding 610 mm: Length 4,000 mm. For media with a width of

610 mm or less: Length 8,000 mm

*5 Provided that media length is under 3,000 mm. Excludes the eects of slanted movement and of expansion and contraction of the media.

*6 Data size:1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is

reloaded. During cutting, [PREFEED] menu item must be set to “ENABLE.” Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.

*7 Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width,

the preset temperature may fail to be reached.

Ink

ECO-SOL MAX2 ESL4-4CY Cyan, 440cc

ESL4-4MG Magenta, 440cc

ESL4-4YE Yellow, 440cc

ESL4-4BK Black, 440cc

ESL4-4LC Light cyan, 440cc

ESL4-4LM Light magenta, 440cc

ESL4-4LK Light black, 440cc

ESL4-MT Metallic silver, 220cc

ESL4-WH White, 220cc

Cleaning cartridge ESL4-CL Cleaning liquid, 1pc.

Blades ZEC-U5025 For thick, reective and uorescent vinyl, 5pcs.

ZEC-U5022 For thick, reective and uorescent vinyl, 2pcs.

Blade Holders XD-CH2 Blade holder with blade extension adjuster, made of aluminum

XD-CH3 Blade holder with blade extension adjuster, made of resin

Optional DU-640 heater

Dryer unit Heating type (with blower fan), setting range for the preset temperature: 30 to 55°C *1

Power requirements *2 AC 100 to 120V ±10%, 5 A, 50/60 Hz or AC 220 to 240 V ±10%, 3 A, 50/60 Hz

Power consumption Approx. 650 W

Weight 26 kg

Environmental Power on Temperature: 15 to 32°C (20°C or more recommended), humidity: 35 to 80% (no condensation)

Power o Temperature: 5 to 40°C, humidity: 20 to 80% (no condensation)

Included items Power cord, arms, bushing, cable clamps, stays, hexagonal wrench, bolts, washers, user’s manual

*1 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.

Depending on the ambient temperature and media width, the preset temperature may fail to be reached.

*2 Be sure to connect the machine to an unshared electrical circuit. Be sure to verify the amperage of the circuit breaker or fuse used.

Roland VersaWorks System Requirements

Operating system

Windows

7 Professional or Ultimate (32/64-bit); Windows Vista

Business/Ultimate (32/64-bit);

Windows

XP Professional Service Pack 2 or later (32/64-bit)

CPU Core™2 Duo, 2.0 GHz or faster recommended

RAM 2 GB or more recommended

Video card and monitor A resolution of 1,280 x 1,024 or more recommended

Free hard-disk space 40 GB or more recommended

Hard-disk le system NTFS format

Optical drive DVD-ROM drive

*Roland VersaWorks

is a 32-bit application, which runs on 64-bit Windows® with WoW64 (Windows 32-bit on Windows 64-bit).

Application software

Adobe® Illustrator® 10, CS, CS2, CS3, CS4, CS5 / CorelDRAW® 11, 12, X3, X4, X5

Roland DG Benelux nv | Houtstraat 3 - B-2260 Oevel | T: +32 14 57 59 11 | F: +32 14 57 59 12 | www.rolanddg.be

Roland DG Deutschland GmbH | Halskestrasse 7 - D-47877 Willich | T: +49 2154 8877 95 | F: +49 2154 8877 96 | www.rolanddg.de

Roland DG Benelux nv - Hungarian Ofce | FSD Park 3 - H-2045 Törökbálint | T: +36 23 338 041 | F: +36 23 338 087 | www.rolanddg.hu

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Roland XR-640 Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Roland XR-640