Roland RSS M-300 Guía de usuario descargar pdf (Pagina 21)

Using M-300 RCS

In offline mode, you can make virtual settings for an input/output unit (e.g., S-1608

stage unit, S-0816 FOH unit, S-4000S 40-channel I/O modular rack) that will later be

connected to the M-300 console. This lets you make preamp gain settings or input/

output patching ahead of time, to specify the M-300’s input/output settings that will

be used at the actual performance.

From the “Setup” menu, choose “REAC Config.”

fig.ScrReacConf.eps

The “REAC Config” dialog box will appear.

Access the “REAC A tab” (or “REAC B” tab).

From the pulldown menu, select the input/output unit that you will

connect to REAC A (or REAC B).

The pulldown menu gives you the following choices:

Access the “REAC B” tab, and make REAC B settings as described in

steps 2 and 3.

REAC input/output settings

(No Device) No connection

S-1608 S-1608 stage unit

S-0816 S-0816 FOH unit

S-4000S S-4000S 40-channel I/O modular rack

S-0808 S-0808 8x8 I/O UNIT

S-4000M REAC MERGE UNIT S-4000M

S-MADI REAC MADI BRIDGE S-MADI

FOH SPLIT M-300, M-380 or M-400 split operating as the FOH console

(REAC A only)

Settings in the REAC Config

dialog box are used to

supplement offline mode.

When you load a project on

the M-300 console itself, or

switch to online mode, the

settings for the input/output

units that are actually

connected to the M-300 will

be applied.

he “REAC Config” dialog box

is unavailable in online

mode.

Choose FOH if the split from

another M-300 being

operated as a FOH console

will be connected to REAC A

and used as a monitor/

broadcast console.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentarios a estos manuales

Sin comentarios

Roland RSS M-300 Guía de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Roland RSS M-300