Roland cakewalk A-800PRO Manual de usuario descargar pdf (Pagina 52)

Assigning MIDI Messages (EDIT Mode)

Here’s how to assign a program change message to a controller.

1 Press the [ACT] button and [ ] button simultaneously.

2 Slightly move the controller to which you want to assign a control

change message.

If the controller is a button, press it.

The number of the selected controller will blink in the display.

3 Verify that the display, and press the [ENTER] button.

fig.lcd-programchange.eps

4 Turn the [VALUE] knob until

“PROGRAM CHANGE” appears in the

display.

fig.lcd-midichannel.eps

5 Press the [ENTER] button.

The display will indicate the currently

specified MIDI transmit channel.

6 Use the [VALUE] knob to specify the desired MIDI transmit channel.

fig.lcd-pcnumber.eps

7 Press the [ENTER] button.

The display will indicate the currently

specified program change number.

8 Use the [VALUE] knob to select the desired program change

number.

9 Press the [ENTER] button.

If you’ve assigned this message to [R1]–[R9], [S1]–[S9], or EXPRESSION (P2), moving

the controller to the maximum position will transmit the program change message

you specified.

Program Change Assignment

MIDI transmit channel BANK MSB BANK LSB Program number Port

1–16 X X 0–127 (00–7FH) PORT1 (fixed)

A-300_500_800C_e.book 52 ページ２０１０年２月２２日　月曜日　午後９時１３分

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 91 92

Sin comentarios

Roland cakewalk A-800PRO Manual de usuario Pagina 52