Roland R-1000 Manual de usuario descargar pdf (Pagina 2)

Description:

When sheets are fed automatically, two or more sheets may be fed inadvertently into a processing machine. This can damage tools, cause halt in

production or result in expensive repairs. The double sheet detector E10 can reliably prevent this from occuring.

In addition to the connection of one sensor an option is available to connect four sensors of the same type (E10 4P). Sensor switching is accomplished

either separately sequentially via the PLC or via program selection. In the latter configuration the system is also used for Hidden Parts Detection.

Function:

The double sheet detector is based on the electromagnetic principle. It monitors ferromagnetic sheets with one-sided contact and exerts force during

the monitoring process only. A change of the sheet thickness results in a change of induction. The system calculates the sheet thickness from this

change. Corresponding to the pre-set limits 0-sheet, 1-sheet or 2-sheets signals are generated.

One sensor can be connected to the control unit (type E10) or up to 4 sensors (type E10 4P). The control unit is available in 3 versions A, B and C.

Memory and signal inputs:

Version A: Memory for 255 parameter sets (thicknesses). Programming and addressing

by push buttons. Measurement start via control input

Version B: Memory for 255 parameter sets (thicknesses). Programming by push buttons

Addressing with 9 respectively 11 data inputs opto coupled 24 VDC with joint common

Version C: Memory for 255 parameter sets (thicknesses). Programming by push buttons

Addressing with 9 respectively 11 data inputs opto coupled 24 VDC with joint common

1 opto coupled RS 232 interface for bidirectional data communication with a PLC or a PC

Signal outputs Relay version (Version A and B): Optocoupled version (Version B and C):

Signal outputs: dry two way contacts Emitter and collector

Maximum switching voltage: 250 V AC 50 V DC

Maximum switching current: 1 A 150 mA

Maximum switching power: 240 W / 200 VA 100 mW

Sensors: P 36 GS P 42 GS P 75 GS

DOUBLE SHEET DETECTOR E10

Sensor cable

DOUBLE SHEET DETECTOR E10

Sensor Diagrams: Systems reaction time with upper switching limits (UL) at 150%, 120% and 100% of nominal sheet thickness

P 36 GS P 42 GS

Spring loaded sensor bracket with vacuum cup SHS

for sensors P 36 GS and P 42 GS

(also available without vacuum cup as type SH...GS)

P 75 GS

optional rigth angle receptacle

300

or custom made

Lift max. 65

min. 25

movable

Clampin

bracket SHK

fixed

110

Sprin

loaded sensor bracket

Sensor

Cup

ø25

Measurement

001-1 N=1.00 on

0.80<=1.02=>1.20

Program

number

Selected sensor (1-4)

Nominal thickness

001-1 N=1.00 on

0.80<=1.02=>1.20

Measuring

value

Upper limit

Lower limit

LED buttons

Function of the LED buttons

Function of the LED´s

Technical Data:

Operating voltage: 24V DC ± 4V

Power consumption: < 17 W

Enclosure meets: IP 65

Ambient temperature: 0 - 50

(32

to 122

Weight: approx. 1,5 kg

(3.3 lb)

Dimensions

Unit E10: Unit E10 4P

Width: 140 mm 180 mm

Height: 140 mm 140 mm

Depth: 71 mm 71 mm

Order data:

Control unit for the connection of one sensor:

E 10 A - R: Manual operation Relay-Version

E 10 B - R: Control via PLC Relay-Version

E 10 B - O: Control via PLC Opto coupler-Version

E 10 C - O: Download via PLC Opto coupler-Version

Control unit for the connection of up to four sensors:

E 10-4P-B - R: Control via PLC Relay-Version

E 10-4P-B - O: Control via PLC Opto coupler-Version

E 10-4P-C - O: Download via PLC Opto coupler-Version

Control unit with central sensor cable

for the connection of up to four sensors

E 10-4P-B - R - Z: Control via PLC Relay-Version

E 10-4P-B - O - Z: Control via PLC Opto coupler-Version

E 10-4P-C - O - Z: Download via PLC Opto coupler-Version

Sensors:

P 36 GS Electro-magnet up to 2,5 mm single sheet thickness

(The sensor P 36 GS should only be used in case of

confined space situations. The standard sensor

should be P 42 GS)

P 42 GS Electro-magnet up to 4,0 mm single sheet thickness

P 75 GS Electro-magnet up to 6,0 mm single sheet thickness

Sensor cable:

CPS - 5 - G Oil:Straigth receptacle (Standard cable length 5m)

CPS - .. - G Oil:Straigth receptacle (Cable up to 25m made to order;

for longer cables enquire)

CPS - 5 - W Oil:Rigth angle receptacle (Standard cable length 5m)

CPS - .. - W Oil:Rigth angle receptacle (Cable up to 25m made to

order; for longer cables enquire)

Special accessoires:

SH 36 GS: Spring loaded sensor bracket for P 36 GS

SH 42 GS: " P 42 GS

SHS 36 GS: " with vacuum cup for P 36 GS

SHS 42 GS: " with vacuum cup for P 42 GS

SHK: Clamping bracket

2395110: Rubber lips for vacuum suction cup

PWS E10 Program selection box

RPP: Software (DOS) for parameter back up (Version C only)

Plug width 30 mm

SW90

ø30

Necessary space

for sensor plug

connection: 75mm

68,5

M75x1,5

ROLAND ROLAND

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Roland R-1000 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para No Roland R-1000