Roland Stika STX-7 Guía de usuario descargar pdf (Pagina 11)

Type in “STIKA” then click on the Settings button. The following dialog box will open.

Ensure that the font is set to Arial - Bold (if not available choose another font), and change the

Height to 30. Click OK on the Text settings dialog box, then OK on the Text entry dialog box.

4. Choose File > Plot. From the dialog box click on the Connection button. Check that the con-

nection is set correctly for the device and the computer port that you are using (eg., STIKA

STX-7 would normally use LPT1, STIKA SCP-85 would normally use COM1 or COM2).

(For details of output Via Generic / Text Only Printer driver, see Connection page 22.) Close

the Connection dialog box.

5. Click OK on the Plot dialog box. The sign should now be cut.

Page 9DESIGN TOOLS - Stika Design

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Sin comentarios

Roland Stika STX-7 Guía de usuario Pagina 11