Roland Metaza MPX-90M Manual de usuario descargar pdf (Pagina 30)

2-1 Preparing for Printing

Chapter 2 Printing

STEP 2: Specifying Output Destination for METAZAStudio

Procedure



Start METAZAStudio.

 P. 22, "How to Start The Software"



Click [File] → [Set up the printer].

The [Print Setup] dialog box appears.



Select [MPX-90M].

Click [OK].

STEP 3: Preparing Instrument to be Imprinted

The requirements for the instrument to be imprinted by the machine are described below. The instrument

needs to meet all these requirements.

Thickness

0.3 to 40 mm (0.012 to 1.5 in.)

Size

The instrument is large enough to be rmly secured.

The machine uses the vise or adhesive sheet to secure the instrument to be imprinted. Though it is accepted

even if the size of the instrument is the one to protrude from the vise or adhesive sheet, the essential require-

ment is that the instrument can be rmly secured.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 91 92

Sin comentarios

Roland Metaza MPX-90M Manual de usuario Pagina 30