Roland XC-540MT Manual de usuario descargar pdf (Pagina 118)

Description

The movement distance of media experiences subtle changes due to the thickness of the media and

the temperature of the media heating system. When the movement distance becomes discrepant,

horizontal stripes are more likely to occur during printing. We recommend performing correction to

match the media you're using and the media heating system. Also, perform the actual printing in an

operating environment identical to that used for the test pattern.

To make the setting for the correction value even more accurate, we recommend carrying out the fol-

lowing before printing the test pattern.

○ After loading the media, use to feed out the media by about one meter.

○ Set the print-start position near the center of the media.

 P. 91, "Setting the Output-start Location"

Note, however, that you can also make this setting on the computer (by, for example, choosing the

media type in the software RIP you are using). When you have made the setting on the computer, the

computer's setting is used and the printer's setting is ignored.

Default Setting

[SETTING]: 0.00%

Approx. 1 m

Print-start position

6-7 Correcting Misalignment for Printing or Cutting

116

Chapter 6 Feature Reference

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 171 172

Sin comentarios

Roland XC-540MT Manual de usuario Pagina 118