Roland HP 555G Especificaciones descargar pdf (Pagina 11)

HP-535 Nov. 1998

Turn off the switch of the test cable.

If the result is OK, the following display will appear in the LCD.

(3) PC2: Settings for connection to an IBM-compatible computer

An underline will be displayed below P2 in the LCD.

Set the computer switch to PC2. The Song LED at the right of the display will light.

Connect a computer test cable (part no. 17049906) to the Computer connector under the keyboard, and turn on the switch of the

computer test cable. If the result is OK, the following display will appear.

Turn off the switch of the test cable.

If the result is OK, the following display will appear in the LCD.

Press the [Function] button to proceed to item 7.

7. LCD check

When you enter this mode, the entire LCD will go dark.

Next, press the [Function] button and confirm that the LCD lights entirely.

Then press the [Transpose] button to proceed to item 8.

8. Destination region setting

The following display will appear.

Now press the [Beat] button to select DOM (Japanese) specifications, or press the [Tempo] button to select EXP (export) specifications.

* When you enter this setting, the HP-535 will automatically return to the factory settings.

Press [Function] button to proceed to the next test.

9. Exiting test mode

To exit test mode, turn off the power.

10.Mic check

After exiting test mode, connect a mic to the Mic In jack located under the keyboard, and rotate the knobs (Mic Volume and Mic Echo) to

verify that each function operates correctly.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sin comentarios

Roland HP 555G Especificaciones Pagina 11