Roland CX-400 Especificaciones descargar pdf (Pagina 29)

Guide lines

25 mm

(1 in.)

or more

25 mm

(1 in.)

or more

Brake

Roll material

Screws

Brake

Pull out the material from the roll and pass it through

the unit.

Stretch taut, with no slackness.

Position the left- and right-hand pinch rollers as shown in the figure.

Position the middle pinch roller over the grit roller that lies between the left- and right-hand pinch rollers.

While keeping the material stretched taut, raise the

sheet loading lever to secure the material in place.

When using a material which is narrower than 762 mm

(30 in.), do not lower the middle pinch roller.

Position the stoppers so that they lightly touch the

edges of the roll, and secure in place by tightening the

screws.

Release the brake.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Sin comentarios

Roland CX-400 Especificaciones Pagina 29