Roland CX-400 Especificaciones descargar pdf (Pagina 52)

Make sure the power to the unit is

off before attempting to replace the

separating knife.

Doing so may result in injury.

8-3 How to Replace the Separating Knife

Switch off the power to the CX-500/400/300.

If the separating knife, replace it with the replacement knife included with the CX-500/400/300. Follow the steps below to replace

the knife.

Replace with a new knife.

Remove the separating knife.

(1) Loosen the screw until it slips out.

(2) Grasp the screw portion, and slowly pull it out in

the direction of the arrow.

* Do not pull back while doing this.

Install the separating knife.

(1) Grasp the screw portion and slowly insert it into

the groove.

* Take care to ensure that the knife does not slip

(2) Tighten the screw.

Positioning groove

The knife is secured in place

by the magnet.

* If the blade remains in the carriage, use tweezers to remove it.

(2)

(1)

(2)

(1)

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Sin comentarios

Roland CX-400 Especificaciones Pagina 52