Roland VS-2000 Guía de usuario descargar pdf (Pagina 111)

111

Chapter 8 EZ Routing

Chapter 8

6. Only the source and destination channels you specified during Step 4 will be shown. Use [ ], [ ], [ ], and [ ]

to move the cursor and the TIME/VALUE dial to adjust each of the values.

fig.02-20

7. Press [F2 (STEP ->)]. You can return to the previous screen by pressing [[F1 (STEP<- )].

8. Make the settings for the effects. Use [ ], [ ], [ ], and [ ] to move the cursor and the TIME/VALUE dial to

adjust each of the values. Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX B)] to make settings to

EFFECT B (EFX3/4).

fig.02-21

9. Press F2 (STEP ->)]. You can return to the previous screen by pressing [F1 (STEP<- )].

10.Decide whether or not to record the output of each effect to a track. First, press the Effect SELECT button for Effect 1 or Effect

2, then press the STATUS button for the track you want the effect recorded on. To select EFX 3 or EFX 4, hold [SHIFT] and

press the Effect SELECT button.

fig.02-22

Pan/Balance

Level

Output destination

(MIX bus or track)

Cursor

Effect Switch

Send Level

Send Balance

Cursor

Track to be recorded

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 281 282

Sin comentarios

Roland VS-2000 Guía de usuario Pagina 111