
187
Chapter 14 Other Useful Functions
Chapter 14
* When you release [SELECT] after adjusting the pan, the edit
screen of that channel may appear, but the MONITOR knob
will adjust the pan only for the channel whose [SELECT]
button is being pressed. For example, even when the edit
screen for Track 1 is displayed, turning the MONITOR knob
while holding down the Track 2 [SELECT] button will adjust
the Track 2 pan.
Shut Down and Restart
Turning Off the Power
The contents of any recorded song will be lost if you simply
turn the power off. This can also damage the hard drive. To
safely turn off the power and be sure your recorded
performances are saved, always follow the shutdown
procedure when you finish working with the VS-1680.
Shutdown (See
Appendices
, p. 64)
1.
Hold [SHIFT] and press [STOP (SHUT/EJECT)].
2.
“SHUTDOWN/EJECT?” appears in the display. Press
[YES].
3.
“STORE Current?” appears in the display. If you wish to
save the current song, press [YES]. If you do not want to
save it, or if you don’t want to save any changes to the
song since the last time you turned on the VS-1680, press
[NO].
If you have selected a demo song, press [NO] at the
“STORE Current?” prompt—the demo songs are
memory protected.
4.
When shut down has been completed properly,
“PowerOFF/RESTART” appears in the display.
If you wish to restart the VS-1680 without turning off the rear
panel POWER switch, hold [SHIFT] and press [PLAY
(RESTART)]. This restarts the VS-1680. Restart is convenient
when switching removable disks in drives—such as the Zip
drive—connected to the VS-1680’s SCSI connector.
If you wish to complete the shutdown of your VS-1680 turn
down the volume of your audio equipment, turn off the
power of the audio equipment, then turn off the power of the
VS-1680 with the POWER switch on the rear panel.
* After the power is turned off, the momentum of the hard drive
may cause it to continue spinning for a short while. Any
physical shock to the unit during this time may damage the
hard drive. Avoid moving a VS-1680 with hard drive installed
for at least 30 seconds after turning off the power.
Comentarios a estos manuales