Roland KF-7 Manual de usuario descargar pdf (Pagina 11)

Address (H) Size (H) Data (H) Parameter Description Default Value (H) Description

40 1x 00 00 00 02 00-7F TONE NUMBER CC#00 VALUE 0-127 00 0

40 1x 01# 00-7F P.C. VALUE 1-128 00 1

40 1x 02 00 00 01 00-10 Rx. CHANNEL 1-16, OFF Same as the Part Number

40 1x 03 00 00 01 00-01 Rx. PITCH BEND OFF/ON 01 ON

40 1x 04 00 00 01 00-01 Rx. CH PRESSURE (CAf) OFF/ON 01 ON

40 1x 05 00 00 01 00-01 Rx. PROGRAM CHANGE OFF/ON 01 ON

40 1x 06 00 00 01 00-01 Rx. CONTROL CHANGE OFF/ON 01 ON

40 1x 07 00 00 01 00-01 Rx. POLY PRESSURE (PAf) OFF/ON 01 ON

40 1x 08 00 00 01 00-01 Rx. NOTE MESSAGE OFF/ON 01 ON

40 1x 09 00 00 01 00-01 Rx. RPN OFF/ON 01 ON

40 1x 0A 00 00 01 00-01 Rx. NRPN OFF/ON 00 (01*) OFF (ON*)

* When “GM1 System On” and “GM2 System On” are received, Rx. NRPN will be set OFF. When “GS Reset” is received, it will be set ON.

40 1x 0B 00 00 01 00-01 Rx. MODULATION OFF/ON 01 ON

40 1x 0C 00 00 01 00-01 Rx. VOLUME OFF/ON 01 ON

40 1x 0D 00 00 01 00-01 Rx. PANPOT OFF/ON 01 ON

40 1x 0E 00 00 01 00-01 Rx. EXPRESSION OFF/ON 01 ON

40 1x 0F 00 00 01 00-01 Rx. HOLD1 OFF/ON 01 ON

40 1x 10 00 00 01 00-01 Rx. PORTAMENTO OFF/ON 01 ON

40 1x 11 00 00 01 00-01 Rx. SOSTENUTO OFF/ON 01 ON

40 1x 12 00 00 01 00-01 Rx. SOFT OFF/ON 01 ON

40 1x 13 00 00 01 00-01 MONO/POLY MODE Mono/Poly 01 Poly

(= CC# 126 01 / CC# 127 00)

40 1x 14 00 00 01 00-02 ASSIGN MODE 0 = SINGLE 00 at x = 0 SINGLE at x = 0

1 = LIMITED-MULTI 01 at x ≠ 0 LIMITED-MULTI

at x ≠ 0

2 = FULL-MULTI

* ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly struck notes).

This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.

40 1x 15 00 00 01 00-02 USE FOR RHYTHM PART 0 = OFF 00 at x ≠ 0 OFF at x ≠ 0

1 = MAP1 01 at x = 0 MAP1 at x ≠ 0

2 = MAP2

* This parameter sets the Drum Map of the Part used as the Drum Part. This instrument can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial

settings, Part10 (MIDI CH = 10, x = 0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF (0)).

40 1x 16 00 00 01 28-58 PITCH KEY SHIFT -24 - +24 [semitones] 40 0 [semitones]

40 1x 17 00 00 02 08-F8 PITCH OFFSET FINE -12.0 - +12.0 [Hz] 08 00 0 [Hz]

40 1x 18# Use nibblized data.

* PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter

in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for

PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.

40 1x 19 00 00 01 00-7F PART LEVEL 0-127 64 100

(= CC# 7)

40 1x 1A 00 00 01 00-7F VELOCITY SENSE DEPTH 0-127 40 64

40 1x 1B 00 00 01 00-7F VELOCITY SENSE OFFSET 0-127 40 64

40 1x 1C 00 00 01 00-7F PART PANPOT -64 (RANDOM), 40 0 (CENTER)

-63 (LEFT) ,

- +63 (RIGHT)

(= CC# 10, except RANDOM)

40 1x 1D 00 00 01 00-7F KEY RANGE LOW (C-1)-(G9) 00 C-1

40 1x 1E 00 00 01 00-7F KEY RANGE HIGH (C-1)-(G9) 7F G 9

40 1x 1F 00 00 01 00-5F CC1 CONTROLLER NUMBER 0-95 10 16

40 1x 20 00 00 01 00-5F CC2 CONTROLLER NUMBER 0-95 11 17

40 1x 21 00 00 01 00-7F CHORUS SEND LEVEL 0-127 00 0

(= CC# 93)

40 1x 22 00 00 01 00-7F REVERB SEND LEVEL 0-127 28 40

(= CC# 91)

40 1x 23 00 00 01 00-01 Rx. BANK SELECT OFF/ON 01 (00*) ON (OFF*)

* “Rx.BANK SELECT” is set to OFF by “GM1 System On,” and Bank Select message will be ignored.

* “Rx.BANK SELECT” is set to ON by “GM2 System On.”

* “Rx.BANK SELECT” is set to ON by power-on Reset or by receiving “GS RESET.”

40 1x 24 00 00 01 00-01 Rx.BANK SELECT LSB OFF/ON 00 OFF

* This instrument can be recognise Bank Select LSB (40H-43H) even if this message is OFF.

40 1x 25 00 00 01 00-01 TONE REMAIN OFF/ON 01 ON

40 1x 28 00 00 03 00-7F Bank Select LSB Range LSB (from) 40 40H

40 1x 29# LSB (to) 43 43H

40 1x 30 00 00 01 0E-72 TONE MODIFY 1 -50 - +50 40 0

Vibrato rate (= NRPN# 8)

40 1x 31 00 00 01 0E-72 TONE MODIFY 2 -50 - +50 40 0

Vibrato depth (= NRPN# 9)

40 1x 32 00 00 01 0E-72 TONE MODIFY 3 -50 - +50 40 0

TVF cutoff frequency (= NRPN# 32)

40 1x 33 00 00 01 0E-72 TONE MODIFY 4 -50 - +50 40 0

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentarios a estos manuales

Sin comentarios

Roland KF-7 Manual de usuario Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos musicales Roland KF-7